logo

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets

Basic Information
Place of Origin : Guangdong , China
Brand Name : PDKJ
Certification : CE ISO SGS
Model Number : Custom
Trade Information
Minimum Order Quantity : 1 unit
Price : 10000-30000 USD
Standard Packaging : Plywood Case
Delivery Time : 15-30 work days
Supply Ability : 100 set per month
Product Summary

Double-sided projection welding machine for shock absorber mounting brackets: one load welds both faces, MFDC power, 16 s cycle, weld strength above 20 kN, 15-minute changeover.

Product Description
Contents

Sixteen Seconds, Two Faces, Twenty Kilonewtons: The Bracket Is Loaded Once And Welded From Both Sides

Application story  ·  Double-sided projection welding of shock absorber mounting brackets for an automotive group - one load for both faces, 16 s cycle, weld strength above 20 kN

A shock absorber mounting bracket has to be joined to its U-clamp from both faces. Weld it from one side only and the far side stays cold - the joint is strong where the electrode sat and weak where it did not. Weld one side, flip the part, weld the other, and you have doubled the handling, doubled the cycle, and doubled the chance that the second pass no longer lines up with the first. On a part that carries the weight of a vehicle through its suspension, the strength requirement is 20 kN, and it is a requirement, not an average.

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

Double-sided projection welding machine: vertical cylinder above, horizontal cylinder at the side, copper electrode block between them, guarded work zone, swing-arm control panel

The Part: A Bracket, A U-Clamp, And Two Faces To Join

The workpiece is a shock absorber steering mounting bracket with its U-clamp - carbon steel, three millimetres each, which on a projection weld is thick enough that the current has to be there in full at the moment the projections collapse. The joint runs on both sides of the bracket, so the two faces have to be pressed and welded at the same time from opposite directions, or the part moves between them.

The old process could do it - slowly, and not always properly. Projections did not always fuse through, spatter was frequent, some joints came out over-welded, and there were visible gaps between the joined surfaces which means the parts were not seated when the current arrived. The customer's expansion plan at its Xi'an base needed the opposite of all four.

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

The head with a bin of U-clamp brackets beside it: copper electrode block between the vertical and horizontal cylinders, water manifolds with gauges on the panel above

One Load, Both Faces

The machine is built around a single idea: load once, weld both sides. A vertical cylinder comes down on the bracket from above while a horizontal cylinder drives in from the side, so the two faces are pressed and welded in one set-up - no flipping, no second positioning, no re-clamping of a part that has already been welded on one side and distorted by it.

That is what produces the cycle. Sixteen seconds per piece, stable, and the machine is built to hold that for twelve-hour continuous operation rather than for a demonstration. The two cylinders are not fighting each other either: each face is pressed on its own axis, so the projections on both sides collapse into their own seats at the same moment instead of one side taking the force from the other.

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

Operator side, bracket staged for welding

Same station, cycle running

Where The 20 kN Comes From

The power source is a medium frequency inverter DC platform, not a conventional AC transformer. The DC output has no current zero crossing, so the heat going into a three-millimetre projection stays even through the whole weld instead of pulsing twice a cycle, and the current is set and held rather than allowed to drift with the line. That evenness is what makes a projection collapse and fuse instead of exploding into spatter.

The sequence is programmed around it: pre-press builds the force before any current flows, the weld stage puts the current in, post-heat lets the nugget settle without a hard quench, and the soft ramp-up and ramp-down take the edges off the current step so there is no spatter at the start or the end. The result is the number the customer asked for - weld strength at 20 kN or above - with the projections fully fused, the surfaces seated without a gap, and dimensions and appearance inside the vehicle-grade standard.

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

Welding head in the customer's plant: vertical cylinder and electrode above, horizontal cylinder driving the second face in from the side

Fifteen Minutes To Change Model

A dedicated machine still has to run more than one part. One fixture set covers several product specifications, and changing between them takes about fifteen minutes with no complex adjustment - which on a line that changes over once a shift is the difference between a machine that is used and a machine that is worked around.

On top of the tooling there are more than sixteen stored welding schedules, switched with one touch when the model changes. The operator does not adjust the process; the operator selects it. That is also what protects the strength number: the schedule that was proved on the sample is the schedule that runs on the thousandth part.

Safety And Cooling Are Part Of The Cycle

Cycle start is two-hand, with a safety light curtain across the work zone, so neither hand can be under an electrode when the cylinders move. Fault self-diagnostics and current-abnormality alarms run continuously, which turns a drift into an alarm instead of a batch of suspect parts found later at inspection.

The consumables are protected separately. Water cooling is grouped and run in parallel, with pressure, temperature and flow all monitored - three measurements rather than one, because a restricted flow shows up as a temperature rise before it shows up as a burned electrode. An anti-leak suction-back design keeps water out of the working area when the circuit stops. Between them, electrodes and transformer stay in their working window and last the shift.

Double-Sided Projection Welding Machine for Shock Absorber Mounting Brackets 

The machine and its tooling in 3D during design: vertical head, side cylinder, fixture and guarding laid out before anything was cut

Built On Our Own Patent

The machine is built on PDKJ's own core technology and has been granted an invention patent - Certificate for an Automobile Shock Absorber Steering Mounting Bracket Double-Sided Welding Machine - covering both the welding process and the equipment structure. It is not a standard welder with a fixture bolted on: the double-sided arrangement, the way the two faces are pressed, and the tooling that keeps them aligned are the subject of the patent.

For the customer that matters in a practical way. A machine that is a modified standard unit is a machine that anyone can copy and that nobody has to support; a patented arrangement is one where the process is defined, documented and defensible.

Results At The Customer's Plant

Weld strength  stable at 20 kN or above - the strength fluctuation problem is closed

Consistency  projections fuse fully, parts seat without gaps; first-pass yield is up

Cycle  a stable 16 s per piece, which matches the expansion plan without overtime

Uptime  continuous 12-hour operation with significantly lower maintenance cost

The machine has been delivered and is producing at the customer's plant. Quality, efficiency and stability arrived together, which is the combination a capacity upgrade is actually asking for.

Key Specifications

Item

Specification

Application

Double-sided projection welding of shock absorber mounting brackets to their U-clamp

Industry

Automotive manufacturing - vehicle group and tier-1 component plants

Workpiece

Shock absorber steering mounting bracket with U-clamp, 3 mm + 3 mm

Material

Carbon steel, 3 mm + 3 mm (confirmed on the sample)

Weld type

Double-sided projection welding - both faces pressed and welded in one loading

Machine type

Customised double-sided projection welding machine, patented arrangement

Cycle time

Stable 16 s per piece; built for 12-hour continuous operation

Weld strength

Stable at 20 kN or above, meeting vehicle safety standards

Power source

Medium frequency inverter DC - steady current, concentrated heat, no zero crossing

Process sequence

Pre-press - weld - post-heat - soft ramp-up and ramp-down

Schedules

16+ welding parameter sets stored, one-touch switching between vehicle models

Changeover

About 15 minutes with one fixture set covering several specifications, no complex adjustment

Press

Vertical cylinder for the top face, horizontal cylinder for the side face, independent pressure

Electrodes

Copper electrode block, water-cooled

Cooling

Grouped parallel water cooling; pressure, temperature and flow all monitored; anti-leak suction-back

Safety

Two-hand start plus safety light curtain across the work zone

Diagnostics

Fault self-diagnostics and current-abnormality alarms

Frame

Welded steel frame with sheet-metal guarding and hinged safety doors

Delivery

Built to the customer's drawing; sample welding and strength testing before shipment

Where It Welds

•   Shock absorber mounting brackets and U-clamps, welded on both faces in one loading

•   Suspension brackets, spring seats and steering mounts with a joint on each side

•   Chassis brackets where weld strength is a safety requirement rather than a quality target

•   Thick-sheet projection welds (2.5 - 4 mm) that have to fuse fully without spatter

•   Any part where welding one face and flipping for the other loses alignment or cycle time

Tooling, schedules and process are built from the customer's drawing and a strength requirement. We weld sample parts, test them to the specified load, and only then set the final schedule - so the number in the quotation is a number we have measured.

From Design To Production

01   Bracket drawing, joint position and strength requirement review

02   Sample welding and destructive strength test against the target load

03   Process proposal - double-sided arrangement, power source, cycle estimate

04   3D design of the machine and its tooling

05   Frame, cylinders, electrode assembly and water circuit build

06   Medium frequency power source and control integration, schedules programmed

07   Assembly and run-off on customer parts in our workshop

08   On-site installation, commissioning and strength verification

09   Operator training, then after-sales support and spares

Talk to Pudian Technology

Guangdong Pudian Automation Technology Co., Ltd builds resistance and laser welding equipment in-house - transformers, controllers, electrodes, fixtures and complete machines - one team, one solution. Need to join brackets from both faces at volume? Send us the drawing and the strength requirement, and we will evaluate a double-sided projection welding design, with sample welding and strength testing before you commit.

Guangdong Pudian Automation Technology Co., Ltd

WhatsApp / Tel: +13613793248    Email: jay@gd-pw.com

Website: https://www.spotlaserwelding.com/

Address: 1-2F, Building 3, Qichen Industrial Park, No. 26 Luxi 1st Road, Liaobu Town, Dongguan City, Guangdong Province, China


Send Us An Inquiry
We will reply to you within 24 hours.
Inquiry Details
Contact Information