logo

1500W Air-Cooled Portable Handheld Fiber Laser Welder for Channel Letter Water Tank Railing and Kitchen Equipment

Basic Information
Place of Origin : Guangdong , China
Brand Name : PDKJ
Certification : CE ISO SGS
Model Number : LWM-1200
Trade Information
Minimum Order Quantity : 1
Price : USD 5000-10000 per unit
Standard Packaging : Plywood case
Delivery Time : 14 work days
Supply Ability : 200 units per month
Product Attributes
Highlight

1500W Handheld Fiber Laser Welder

,

Air-Cooled Portable Laser Welding Machine

,

Portable Handheld Laser Welding Machine

Laser Power:
1500W
Welding Speed:
0-20mm/s
Fiber Length:
10m
Operating Voltage:
AC220V
Machine Weight:
75kg
Cooling System:
Air-cooled
Product Summary

Air-cooled 1500W handheld fiber laser welder for stainless, CRS, galvanised and aluminium. Spot and seam welds from one torch at 0-20mm/s, 0.3-4mm capacity. No chiller, no coolant, 75kg on castors. Narrow HAZ cuts grinding and straightening. Sample welding and parameter sheets included.

Product Description
Contents
PDKJ spotlaserwelding.com
LWM-1500F · Air-Cooled · Handheld Laser
A 1.5 mm seam in one pass. No chiller to feed, no grinder to pay.
Spot welds and continuous seams from the same torch, on 0.3–4 mm stainless and cold-rolled sheet, 0.3–3 mm galvanised and aluminium. Air-cooled, so there is no chiller, no coolant and no hose across the floor — the cabinet rolls to the part.
IMAGE 01
1500 W
Single-mode fiber
0.3–4 mm
Stainless / CRS
0–20 mm/s
Seam travel
0 chiller
75 kg, castors
Shipped to  Switzerland  Italy  Mexico  Taiwan, China  Shantou  Jiangsu
01 — The cost you already carry
Four line items this machine removes from the job
Most shops compare it to TIG on weld quality and stop there. The real difference is what happens before and after the weld.
Cooling
TIGWater chiller, coolant changes, a fixed square of floor
LASERFans only. No coolant, no hose run — the cabinet goes to the part
Heat input
TIGWide heat-affected zone, warp on thin sheet, straightening afterwards
LASERConduction weld with a narrow HAZ — 1.0+1.0 mm stainless welds without straightening
Finish
TIGSpatter and discoloration: grind, blend, pickle, re-polish
LASERNarrow uniform bead. On cosmetic panels the grinding step is dropped, not shortened
Hands on the job
TIGTorch hand, fitter, plus whoever does the finishing
LASEROne operator: torch in one hand, program on the HMI
Changeover
TIGFixture, purge, re-tack every time the part changes
LASEREarth clamp on the table, torch in hand, parameters recalled on screen
Where we will tell you not to buy it. This is a conduction-welding source, not a keyhole welder. Deep-penetration joints, closed gas cavities and pipe interiors are usually better served by another process, and above 4 mm the joint design decides the answer — so it gets welded on test before it gets quoted.
02 — The machine
One cabinet, one torch, one cable
680 × 380 × 820 mm and 75 kg on four castors. Nothing to plumb in: the source is cooled by fans, so the welder works where the workpiece is — on a mezzanine, in a finished-goods area, or at the end of a bench that already has a job on it.

IMAGE 02
Whole unit
IMAGE 03
Rear: fans & cable
IMAGE 04
HMI & e-stop
IMAGE 05
Inside: air-cooled
IMAGE 06
Torch head
IMAGE 07
Fiber reel, rear
Installed, not staged
On the customer's own bench
No chiller was installed, because the machine does not need one. Castors, one cable, one torch.

IMAGE 08
Customer bench, day one
IMAGE 09
Second unit, same shop


03 — Spot welding
One trigger pull is one weld
The torch touches, fires once, and the joint is closed. Folding corners, stiffeners, hinge plates, fastener tabs and rivet replacements — the welds that used to be MIG tacks plus a grinder.

IMAGE 11
1.0 mm galvanized sheet + stainless steel
IMAGE 12
1.2+1.0mm Carbon Steel
IMAGE 13
1.2mm elevator stiffener
IMAGE 14
1.2mm thick cold-rolled sheet
IMAGE 15
2.0mm Stainless Steel Cabinet
IMAGE 16
Cabinet reinforcement rib
IMAGE 17
Galvanized sheet
IMAGE 18
Sheet metal welding fasteners
IMAGE 19
Stainless Steel Stiffeners
IMAGE 20
Stainless steel plate
IMAGE 21
Stainless steel stiffener
IMAGE 22
Stainless steel
04 — Seam welding
Hold the trigger and travel
0–20 mm/s continuous bead, no scallops to dress and no stop mark where the seam closes. Door frames, tank shells, duct, tube and hinge barrels — including 4 mm stainless flange work and aluminium tube.

IMAGE 23
1.0 mm thick iron battery box
IMAGE 24
Aluminum tube
05 — Specifications
What is on the nameplate, and what is set per joint
Every figure below is the factory sheet for the LWM-1500F. Working thickness and travel speed belong to the joint, not to the brochure — they are fixed on your sample.
Laser source
Model LWM-1500F
Rated output power 1500 W
Wavelength 1080 nm ±5%
Aiming Red light indicator
Cooling system Air-cooled
Max. input power 4 kW
Machine
Form Cabinet, castors
Dimensions 680×380×820 mm
Weight 75 kg
Power supply AC 220 V
Operating temp. 15–35 °C
Control HMI + e-stop
Wire feeder Optional
Capacity
Stainless / cold-rolled 0.3–4 mm*
Galvanised / aluminium 0.3–3 mm*
Welding speed 0–20 mm/s
Joint types Spot, butt, lap, fillet
Welding mode Thermal conduction
Above 4 mm On test
Delivery scope
Machine 1 unit, configured
Fiber optic cable 10 m standard
Protective gas Argon / nitrogen
Torch & optics Included
Parameter sheet For your parts
Training On-site or remote
* Single-pass capacity on the sheet. Actual capability depends on material grade, joint design and fit-up.
06 — Why this configuration
Six decisions that changed the machine

01
Air-cooled, so it goes to the job
Fans in the cabinet instead of a water circuit. No chiller to buy, no coolant to change, no hose across the floor. The welder works where the workpiece is.
IMAGE 05
02
One operator, one hand
Trigger on the torch, program on the touchscreen. The second shift repeats the first shift's weld because the parameter set is saved, not remembered.
IMAGE 06
03
Spot and seam from the same head
One trigger pull closes a fold; hold it and travel for a continuous bead. No second process, no second machine, no re-fixturing between the two.

IMAGE 06
04
Heat goes into the joint, not the panel
Conduction welding keeps the heat-affected zone narrow. Stiffeners and 1.0+1.0 mm stainless come off the bench flat — no straightening step behind the weld.
IMAGE 19
05
The bead is the finish
Narrow, even, no spatter to chip off. On door panels, cabinets and channel letters the grinding and blending station is the line item that disappears — not just gets faster.
IMAGE 23
06
Cabinet built to be moved
Castors, two steel handles and a cable that coils on the back. 75 kg, 820 mm tall, and it goes through a standard door.

IMAGE 07
07 — Industries
Where the machine earns its space
Twelve groups of buyers keep ordering this configuration. Whatever the drawing says — enclosure, sign, tank, elevator door, battery tray — the question is the same: how thick, which joint, and how clean does the face have to stay.

IMAGE 25
Advertising Signage
IMAGE 26
Architectural Decoration
IMAGE 27
Automotive and Auto Repair
IMAGE 28
Elevators and Doors
IMAGE 29
Environmental and Water Treatment
IMAGE 30
Home Appliance Manufacturing
IMAGE 31
Kitchenware and Sanitary Ware
IMAGE 32
Machinery and Molds
IMAGE 33
Medical Devices
IMAGE 34
Metal Hardware and Tube Fabrication
IMAGE 35
New Energy and Energy Storage
IMAGE 36
Sheet Metal Enclosures
Also welded on delivered units: 1.5 mm stiffener (hardware), 1.0+1.0 mm stainless guardrail (rail transit), 0.6–0.8 mm galvanized door panel (sheet metal), 2.0 mm cold plate (hardware), stainless water distributor (liquid cooling).
08 — Delivery record
Packed, crated and on the water
Air-cooled 1500 W units shipped in 2026, with the configuration that went with them. Photos from the loading bay, not a stock library.

IMAGE 37
Switzerland
Sea freight, one pallet
IMAGE 38
Taiwan, China
Two units, one order
IMAGE 39
Italy
Export wrapped
IMAGE 40
In the crate
What is in the crate
09 — From part to production
Four steps, and you have seen the weld before you pay

STEP 1
Send the part
Material, thickness, joint drawing — or the physical sample.
STEP 2
We weld it
Spot or seam, on your part. It comes back with photos, video and parameters.
STEP 3
Machine is built
LWM-1500F, torch and optics matched to your joints, wire feeder if needed.
STEP 4
Handover
Commissioning on site or remote, training, parameter sheet for your parts.
10 — Straight answers
The questions that come before the order
+What thickness can it weld?
0.3–4 mm stainless and cold-rolled steel, 0.3–3 mm galvanised steel and aluminium, single pass, with the parameter set matched to the joint. Above 4 mm we weld the sample first — if a conduction weld will not hold the joint, we say so before you buy.
+Spot welding and seam welding — is it the same torch?
Same torch, same program source. One trigger pull is one spot weld; hold and travel at 0–20 mm/s for a continuous seam. Switching between them is a parameter recall on the HMI, not a tool change.
+Do I need a chiller or a special power supply?
No chiller and no coolant — the source is air-cooled. It runs on a standard AC 220 V supply and draws up to 4 kW at full output. Ambient working range is 15–35 °C.
+Can it weld aluminum?
Yes — 0.3–3 mm aluminium, with its own parameter set and usually the wire feeder. Aluminium reads the heat differently from steel, so we weld your sample first and hand over the parameters that worked on it.
+What about gaps and fillet joints?
That is what the optional wire feeder is for. Cold wire fills the joint so the bead stays full at full travel speed, instead of forcing the operator to slow down and over-heat the panel.
+Is it safe to run in a normal workshop?
It is a Class 4 laser product. It ships with the interlock and the safety documentation, and the operator needs laser safety glasses matched to 1080 nm. We cover the practical side in the training.
Send one part
We weld it and send the video back.
Tell us the material, the thickness and the joint. You get the welded sample, the parameters and the lead time — no obligation, no catalogue.
Start with a sample
WhatsApp
+86 136 1279 3248
Email
jay@gd-pw.com
Website
spotlaserwelding.com
Factory
Dongguan, Guangdong, China
PDKJ
Guangdong Pudian Automation Technology Co., Ltd — resistance spot welders, laser welders and robotic welding systems for sheet metal production.
Related equipment
Company
© 2026 Guangdong Pudian Automation Technology Co., Ltd
LWM-1500F air-cooled handheld fiber laser welding machine
Send Us An Inquiry
We will reply to you within 24 hours.
Inquiry Details
Contact Information